New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder

New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder
New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder
New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder
New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder
New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder

New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder
CHECK YOUR BOLT PATTERN TO CONFIRM FIT. Will fit Okuma & others 40mm ID CNC Lathe bolt on tool block boring bar holder Type 5. Holder comes with only what is pictured no screws. These holders came with a new machine direct from Okuma and the user only does OD turning so has no need for them. Bolt pattern is 80mm X 45mm that will fit 12mm bolts. The ID is 40mm metric. The block size is 4 wide X 3.250 deep X 2.5 high. Cadet, Captain 370, ESL8, ESL10, Heritage, LB-15, LB15IIM, LB250T, LU25, LU15, Crown, LB25, CAP470, L1420, LB4000EXBB/1500, L470, Genos250-V8, LB3000, LU4000. BOLT HOLE PATTERN 80mm x 45mm. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding”. The seller is “64moco” and is located in this country: US. This item can be shipped worldwide.
  • Tool Type: Holder
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Brand: Okuma

New Okuma & others 40mm ID CNC Lathe bolt on tool block holder boring bar holder

Turret Tool Holder Block Base Boring Bar CNC Lathe 2.832 x 2.089 Bolt (Stk39)

Turret Tool Holder Block Base Boring Bar CNC Lathe 2.832 x 2.089 Bolt (Stk39)
Turret Tool Holder Block Base Boring Bar CNC Lathe 2.832 x 2.089 Bolt (Stk39)
Turret Tool Holder Block Base Boring Bar CNC Lathe 2.832 x 2.089 Bolt (Stk39)

Turret Tool Holder Block Base Boring Bar CNC Lathe 2.832 x 2.089 Bolt (Stk39)
Bolt Pattern: Perpendicular with the boring bar 2.832″ x Parallel with the boring bar 2.089″. 4.018 x parallel…. 4.821″ x Height 3″. Circle on the Bottom: 50mm. Boring Bar Capacity: 1.75. Missing 2 set screws on 1 side. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding”. The seller is “industrialsurplusassets” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Unbranded

Turret Tool Holder Block Base Boring Bar CNC Lathe 2.832 x 2.089 Bolt (Stk39)

New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder

New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder
New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder
New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder
New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder
New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder

New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder
CHECK YOUR BOLT PATTERN TO CONFIRM FIT. Will fit Okuma & others 40 MM ID CNC Lathe bolt on tool block boring bar holder Type 5. Holder comes with only what is pictured. These holders came with a new machine direct from Okuma and the user only does OD turning so has no need for them. Bolt pattern is 80mm X 45mm that will fit 12mm bolts. The ID is 40 MM. The block size is 4 wide X 3.250 deep X 2.5 high. Cadet, Captain 370, ESL8, ESL10, Heritage, LB-15, LB15IIM, LB250T, LU25, LU15, Crown, LB25, CAP470, L1420, LB4000EXBB/1500, L470, Genos250-V8, LB3000, LU4000. BOLT HOLE PATTERN 80mm x 45mm. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding”. The seller is “64moco” and is located in this country: US. This item can be shipped worldwide.
  • Tool Type: Holder
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Brand: Okuma

New Okuma & others 40 mm ID CNC Lathe bolt on tool block 40mm boring bar holder

DAEWOO DOOSAN CNC OD TURRET TOOL HOLDER BLOCK 80MM x 45MM BOLT SPACING 40MM KEY

DAEWOO DOOSAN CNC OD TURRET TOOL HOLDER BLOCK 80MM x 45MM BOLT SPACING 40MM KEY
DAEWOO DOOSAN CNC OD TURRET TOOL HOLDER BLOCK 80MM x 45MM BOLT SPACING 40MM KEY

DAEWOO DOOSAN CNC OD TURRET TOOL HOLDER BLOCK 80MM x 45MM BOLT SPACING 40MM KEY
DAEWOO DOOSAN TURRET TOOL BLOCK. 80MM x 45MM BOLT HOLE PATTERN. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Other Toolholding”. The seller is “imts2004″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Paraguay, Reunion, Uruguay.
  • Holder Type: Lathe
  • Brand: DAEWOO

DAEWOO DOOSAN CNC OD TURRET TOOL HOLDER BLOCK 80MM x 45MM BOLT SPACING 40MM KEY